Views: 0 Author: Site Editor Publish Time: 2025-05-20 Origin: Site
Purification of clean engineering decoration material selection is related to air quality and engineering effect. Need to consider environmental protection, antibacterial mould, corrosion resistance, anti-static and high temperature resistance and other characteristics. Design and construction should pay attention to the choice of materials to ensure project quality and safety.
Clean Room roof, wall, floor six-sided enclosure, how to choose the decoration materials in order to comply with the appropriate standards and norms, so that the project acceptance is carried out smoothly?
There are fewer materials to choose from for floor decoration, which are commonly used in clean operating theatre decoration:
Glazed tiles, terrazzo, epoxy resin, PVC coil, rubber coil and so on. In terms of meeting the specification requirements, terrazzo, epoxy resin, PVC coils, rubber coils are in line with the specification requirements, from the applicability, decorative effect and maintenance on the comparison of PVC coils and rubber coils are more suitable, so it has become the mainstream decorative materials, in the major hospitals have a better use of the effect.
The optional operating room wall decoration materials are more, commonly used in clean operating room decoration:
Electrolytic steel plate, stainless steel plate, rust-proof aluminium plate, colour steel plate, aluminium composite panel, resin plate, cassel plate, glass plate, ceramic tiles and paint. The above materials can be used as long as they meet the specification requirements for the structural sealing of Wall Panels. Currently hospitals use electrolytic steel plate, stainless steel plate, rust-proof aluminium plate is more, for the humane characteristics of the operating room, the current use of resin panels and glass panels are also quite a lot.
Operating theatre ceiling is generally unified with the wall material, in the operating theatre ceiling to avoid reserving the upper maintenance port, to avoid due to the technology of the mezzanine due to the leakage of air often form a positive pressure, which will result in leakage from the holes and gaps to the operating theatre.
Clean operating room in and out of the door of the operating car, the net width should not be less than 1.4m, the operating room according to the need to set the type of door, generally used: electric hanging door, manual sliding door.
If the operating room for radiation protection or shielding, according to the need to choose the appropriate radiation doors and shielding doors, and in the selection of this type of automatic door to avoid the selection of the type of groove with the ground, mainly to avoid the ground to appear in the groove accumulation of dirt.
Automatic doors should be set up with automatic time-delayed closing device, and ensure the effect of gas sealing.
Operating theatres should generally not have external windows, artificial lighting should be used, mainly to avoid the impact of outdoor light on the operation and the pollution of the outdoor environment of the operating theatre. Radiation protection and shielding of special Observation Windows in the operating room need to be in accordance with the relevant specification requirements, and the connection between the window frame and the wall should be done well to avoid radiation leakage and shielding failure.
Floor decorative materials are basically similar to those used in the operating theatre, with PVC coils and rubber coils becoming the dominant decorative materials at present.
Auxiliary room materials are generally: colour steel plate, aluminium composite panel, resin plate, Kasol board, ceramic tiles and paint and so on. Various materials have their own advantages and disadvantages, according to the specific needs of the room and the hospital cost to choose the appropriate material.
At present, the choice of ceiling material is generally: aluminium buckle plate, colour steel plate, rust-proof aluminium plate, etc., the material is in line with the specification requirements, according to the needs of the hospital and the cost of indicators such as the choice can be made. Pay attention to the flatness and sealing of the top plate during construction.
The automatic doors and manual doors in the Clean Rooms should be air-sealed doors to avoid pressure leakage. In addition to the clean area to the non-clean area of the casement door and security door for the outward opening, the other clean area of the door to the static pressure of the direction of high opening. At the entrance of corridor and operation department, the door should be set as automatic door with automatic time-delayed closing and anti-impact function, and manual function should be provided.
Class III and IV clean auxiliary rooms can be equipped with external windows, but they should be non-openable double-glazed airtight windows or two windows, and avoid direct sunlight.
The auxiliary rooms and corridors of the operation department can be equipped with hand-brushing pools and storage cabinets according to the layout.
